7075-T73 Aluminum Test Panel
7075-T73 aluminum test panels are available in a wide range of gauge thicknesses and surface finishes. This aluminum alloy is often used in aerospace applications. 7075-T73 has lower strength but more flexibility when compared to 7075-T6 aluminum.
Regular test panels are PVC-coated on both sides, cut to size, deburred, and packed in bundles. These panels may have some minor surface defects and will have mill oil on the surface, as these are the sheets in “as-received” condition from the aluminum mill.
Pre-cleaned panels are cut to size, deburred, and wiped and cleaned on both sides with solvent per ASTM D609 to remove mill oil and fingerprints. The panels are also scrubbed with soft material to remove visible surface oxidation. Pre-cleaned panels have an as-rolled surface finish, which may have minor scratches or surface defects. The panels are interleaved in plastic to protect the surface. These panels are not PVC coated when shipped, making the panels ready to use for most applications.
Premium polished panels are cut to size, deburred, and polished with a very fine sanding belt to remove any visible defects on one side. The reverse side of the panel may have some detectable scratches – premium polished panels are only premium on one side, not both. The panels are wiped and cleaned on both sides with solvent per ASTM D609 to remove mill oil and fingerprints. The panels are interleaved in plastic to protect the surface. These panels are not PVC coated when shipped, making the panels ready to use. Most Metaspec customers prefer our premium polished panels, but this high level of surface condition is not necessary for some applications.
Test panels may also be sand blasted, polished or sanded on one or both sides, offering an even higher level of surface finish quality. Plated or anodized surface finishes (such as MIL-A-8625 or MIL-DTL-5541) are available on request. Metaspec also offers customized test panel options, including holes, stamping, serial numbering, and more.